- Monday 8:00 AM - 5:00 PM
- Tuesday 8:00 AM - 5:00 PM
- Wednesday 8:00 AM - 5:00 PM
- Thursday 8:00 AM - 5:00 PM
- Friday 8:00 AM - 4:00 PM
- Saturday Closed
- Sunday Closed
The stationary, electric Peterson 5050H Delimber Debarker Disc Chipper produces high quality low bark content chips for wood pulp and pellets, processing whole trees in one continuous operation.
Equipped with a large feed throat, the 5050H can accept up to a 23-inch (56 cm) diameter single tree or multiple smaller stems. The 5050H can be configured with a three or four pocket disc, with several optional sheave sizes to make precisely the chip you need.
The standard three-pocket disc produces chips from ⅝ to 1 ¼ inches (16–32 mm) long, while the optional four-pocket disc produces chips from ½ to 1 inches (13–25 mm) long. Chipping production rates up to 150 tons (136 tonnes) per hour can be achieved depending on chip size and wood characteristics.
| Drum Size | 50" diameter x 60" width |
| Knife Pockets | 8 or 16 pockets (staggered) |
| Knife System | Babbitt or Key Knife™ |
| Chip Size | ¼" to 1 ¼" |
| tri-Axle Weight | 59,960 lbs |
| 5th Wheel Weight | 45,000 lbs |
| Total Weight | 103,500 lbs |
|
|
|
| Operating Length | 54' 7" |
| Operating Width | 15' 2" |
| Travel Length | 52' 9" |
| Travel Width | 11' 9" |
| Travel Height | 13' 6" |
| Frame Length | 50' 9" |
| Front Ground Clearance | 2' 11" |
| Rear Ground Clearance | 10" |
| Ground Clearance | 13" |
| Axle Spacing | 60" |
| Front to 5th Wheel | 1' 8" |
| 5th Wheel to Center Axle | 41' 9" |
| 5th Wheel to Rear Axle | 46' 9" |
| 5th Wheel Height | 4' 2" |
| Fuel Tank Capacity | 300 gal |
| Electric Power |
USA: 460 VAC, 60 Hz, 3-phase Europe : 400 VAC, 50 Hz, 3-phase Canada: 575 VAC, 60 Hz, 3-phase |
| Disc Motor |
crusher duty, 1x 600 hp crusher duty, 2x 400 hp crusher duty, 2x 500 hp |
| Hydraulic Motor | pump duty, 1x 600 hp |
| Adaptive Control System | Yes |
| Radio Remote | Yes |
| Peterson+ Analytics | Yes |
| Feed System | Specifications |
|---|---|
| Feed Opening (w x h) | 53" w x 24" h |
| Feed Speed Range | 64 to 170 ft/min |
| Maximum Log Diameter | 23" |
| Feed Rolls | dual with floating top rolls |
| Lower Feed Rolls | 7 powered |
| Log Loader | |
| Lift Capacity | 11,851 lbs at 15' |
| Hydraulic Knuckle Boom | 2-section, 26' 10" |
| Grapple with Heel Rack | 360° rotation, 42" |
| Controls | two lever electronic joystick |
| Enclosed Weatherized Operator's Cab | with Air Conditioner |