Astec - Peterson 5050H Electric Whole Tree Chipper
|
|
|
Specifications
|
Model |
5050H
|
Category Name |
Forestry & Environmental Recycling
|
Year |
2025
|
|
Sale Type |
New
|
Manufacturer |
Astec - Peterson
|
Odometer |
km
|
|
Price |
Contact for price CAD
|
|
|
|
|
Description
|
The stationary, electric Peterson 5050H Delimber Debarker Disc Chipper produces high quality low bark content chips for wood pulp and pellets, processing whole trees in one continuous operation.
Equipped with a large feed throat, the 5050H can accept up to a 23-inch (56 cm) diameter single tree or multiple smaller stems. The 5050H can be configured with a three or four pocket disc, with several optional sheave sizes to make precisely the chip you need.
The standard three-pocket disc produces chips from ⅝ to 1 ¼ inches (16–32 mm) long, while the optional four-pocket disc produces chips from ½ to 1 inches (13–25 mm) long. Chipping production rates up to 150 tons (136 tonnes) per hour can be achieved depending on chip size and wood characteristics. |
|
|
CHIPPER
|
Chipper
| Drum Size |
50" diameter x 60" width |
| Knife Pockets |
8 or 16 pockets (staggered) |
| Knife System |
Babbitt or Key Knife™ |
| Chip Size |
¼" to 1 ¼" |
|
|
WEIGHTS
|
Weights
| tri-Axle Weight |
59,960 lbs |
| 5th Wheel Weight |
45,000 lbs |
| Total Weight |
103,500 lbs |
|
|
FEATURES
|
Features
 Easy-to-Service Chain Flails and Replaceable Wear Liners
Upper and lower chain flails strip bark and limbs from the stems, replaceable UHMW wear liners protect the flail housing sidewalls.
|
 A high visibility, weatherized cab meets OSHA Standards
Ergonomic joystick controls provide precise control of the two-section knuckle-boom log loader. End loading or top loading spouts are available.
|
 Two chipper disc and knife systems available
Peterson disc chippers come with three or four pocket, 66" (167 cm) diameter chipper discs with traditional Babbitted knife systems, or Key Knife™ systems.
|
|
|
DIMENSIONS
|
Dimensions
| Operating Length |
54' 7" |
| Operating Width |
15' 2" |
| Travel Length |
52' 9" |
| Travel Width |
11' 9" |
| Travel Height |
13' 6" |
| Frame Length |
50' 9" |
| Front Ground Clearance |
2' 11" |
| Rear Ground Clearance |
10" |
| Ground Clearance |
13" |
| Axle Spacing |
60" |
| Front to 5th Wheel |
1' 8" |
| 5th Wheel to Center Axle |
41' 9" |
| 5th Wheel to Rear Axle |
46' 9" |
| 5th Wheel Height |
4' 2" |
|
|
POWERTRAIN
|
Powertrain
| Fuel Tank Capacity |
300 gal |
| Electric Power |
USA: 460 VAC, 60 Hz, 3-phase
Europe : 400 VAC, 50 Hz, 3-phase
Canada: 575 VAC, 60 Hz, 3-phase
|
| Disc Motor |
crusher duty, 1x 600 hp
crusher duty, 2x 400 hp
crusher duty, 2x 500 hp
|
| Hydraulic Motor |
pump duty, 1x 600 hp |
|
|
SYSTEM CONTROLS
|
System_Controls
| Adaptive Control System |
Yes |
| Radio Remote |
Yes |
| Peterson+ Analytics |
Yes |
|
|
DELIMBER/DEBARKER
|
Delimber/Debarker
| Flail Drums |
single lower and dual floating upper |
|
| Drum Diameter |
11" |
|
| Flail Rods/Drum |
6 per drum |
|
| Flail Chain/Drum |
78 chains, 8 links each |
|
| Drive Type |
hydrostatic |
|
| Flail Speed Range |
400 to 700 rpm |
|
| End Discharge Bark Mover |
120" x 24" |
|
| Variable Flail Speed |
adjustable from cab |
|
|
|
FEED SYSTEM & LOG LOADER
|
Feed_System_&_Log_Loader
| Feed System |
Specifications |
| Feed Opening (w x h) |
53" w x 24" h |
| Feed Speed Range |
64 to 170 ft/min |
| Maximum Log Diameter |
23" |
| Feed Rolls |
dual with floating top rolls |
| Lower Feed Rolls |
7 powered |
| Log Loader |
|
| Lift Capacity |
11,851 lbs at 15' |
| Hydraulic Knuckle Boom |
2-section, 26' 10" |
| Grapple with Heel Rack |
360° rotation, 42" |
| Controls |
two lever electronic joystick |
| Enclosed Weatherized Operator's Cab |
with Air Conditioner |
|
