.png)
.png)
3-Stage Grinding Process
Impact Release System Protects Your Investment
astec-peterson-2750d-horizontal-grinder-spec-sheet-english.pdf
- Monday 8:00 AM - 5:00 PM
- Tuesday 8:00 AM - 5:00 PM
- Wednesday 8:00 AM - 5:00 PM
- Thursday 8:00 AM - 5:00 PM
- Friday 8:00 AM - 4:00 PM
- Saturday Closed
- Sunday Closed
ID # 39137417
Astec - Peterson 2750D Horizontal Grinder
Call for Price
Overview
Specifications
options
weights
features
downloads
dimensions
powertrain
production
feed system
rotor & grates
system controls
discharge system
Documents
The 2750D electric horizontal grinder is ideal for operations that can take advantage of stationary or semi-stationary operations.
Powered by a single 600 horsepower (450 kW) electric motor, the Peterson 2750D has plenty of power. Since electric power costs are typically much lower than diesel fuel costs, electric power may just be the answer for increasing your profits.
With a feed opening of 60¾ x 32 inches (154 x 81 cm) combined with Peterson’s high lift feed roll for an optional opening up to 44 inches (112 cm) high, the 2750D can reduce a diverse range of raw materials.
Model
2750D
Category Name
Forestry & Environmental Recycling
Year
2025
Sale Type
New
Manufacturer
Astec - Peterson
Weights
| Machine Weight | Approx. 54,000 lbs |
| 5th Wheel Weight | Approx. 21,000 lbs |
| Tandem Axle Weight | Approx. 33,000 lbs |
Features
|
|
Dimensions
| Operating Length | 52' 6" |
| Operating Width | 9' 1" |
| Operating Height | 16' 9" |
| Travel Width | 9' 1" |
| Travel Length | 39' 11" |
| Travel Height | 11' 6" |
| Frame Length | 38' 6" |
| Ground Clearance | 10 " |
| Axle Spacing | 60" |
| Front to 5th Wheel | 5' 11" |
| 5th Wheel to Center Rear Axle | 30' 9" |
| 5th Wheel Clearance Radius | 6' |
| 5th Wheel Height | 3' 8" |
Powertrain
| Electric Power |
USA: 460 volt, 60Hz, 3-phase electric Europe: 400 volt, 50Hz, 3-phase electric Canada: 575 volt, 60Hz, 3-phase electric |
| Europe: 400 volt, 50Hz, 3-phase electric | |
| Rotor Drive Motors | crusher duty, 2 x 600 hp |
| Hydraulic System Motor | high efficiency 100 hp |
| Main Hydraulic Tank Capacity | 95 gal |
Production
| Production (C15 Engine) | Volume | Weight |
|---|---|---|
| Greenwaste | 264 yd³ | 77 tons |
| Scrap Board | 323 yd³ | 55 tons |
*Actual production output may vary due to moisture content, material density and size, support equipment, grate size, and equipment options. Production rates are based on operating 50 minutes per hour with the standard diesel engine.
Feed System
| Feed Opening (w x h) | 60" x 32" |
| Hopper Width | 60" |
| Feed Conveyor Width | 4'10" |
| Feed Chain | 4 sections, full hopper width |
| Compression Roll Diameter | 28" |
| Land Clearing Mode | 60" x 44" |
Rotor & Grates
| Rotor Width | 60" |
| Rotor Diameter | 32" |
| Rotor Shaft Size | 5" @ bearing, 5.75" @ center |
| Bit Size | 2.75" x 5" |
| Number of Bits | 20 drum rotor, 18 pinned rotor, 30 ASG rotor |
| Rotor Speed | 10,000 fpm @2100 rpm |
| Number of Grate Sections | 4 |
| Total Grate Area | 21 ft² |
| Grate Coverage | 180º |
| Grate Thickness | 1" |
System Controls
| Adaptive Control System | Yes |
| Radio Remote | Yes |
| Peterson+ Analytics | Yes |
Discharge System
| Discharge Conveyor Width | 48" | |
| Discharge Conveyor Height | 16' 9" | |
| Conveyor Speed | 500, 600, or 700 fpm |
Model
2750D
Category Name
Forestry & Environmental Recycling
Year
2025
Sale Type
New
Manufacturer
Astec - Peterson
Quantity
1