Astec - Peterson 4310B Déchiqueteuse à tambour

Name: Astec - Peterson 4310B Déchiqueteuse à tambour
Brand: Astec - Peterson
Availability: OutOfStock

Call for Price

The track mounted 4310B Drum Chipper is suited for high volume biomass producers who have a wide variety of feed material from brush and small feed stock to logs up to 24 inches (61 cm) in diameter.
The 4310B is powered by a 755 horsepower (563 kW) C18 Tier IV Caterpillar engine. At 58,500 pounds (26 535 kg), the track mounted 4310B Drum Chipper is designed for operations requiring high production and frequent moves between jobs.

The chipper utilizes a 36 inch diameter by 44¾ inch (91 by 114 cm) wide drum with either 6 or 12 knife pockets. Traditional Babbitt type knife systems are standard equipment. Chip length can be set from 1⁄8 to 1¼ inch (3 to 32 mm) depending on rotor and knife configuration.

Specifications

Model

4310B

Category Name

Forestry & Environmental Recycling

Year

2025

Sale Type

New

Manufacturer

Astec - Peterson

features

Knife Assemblies at the Heart of the Chipper

Produced from the highest quality alloy chromium steel, heavy-duty Astec knife assemblies achieve uniform production of wood chips
with high accepts and minimal losses.

Select from 6- or 12-Pocket Drum

Featuring durable AR400 wear surfaces, the 4300 series Drum Chippers comes standard with an 6-pocket drum rotor with one Babbitted knife per pocket. A 12-pocket drum rotor is available for chipping microchips.

Discharge Spout Options

Two discharge spouts are available on all Peterson Drum Chippers. An end-load spout designed to load closed-top chip vans. A top-load discharge spout is also available and designed to load open-top chip vans.

Superior Product Sizing

Peterson’s drum chipper grate system provides ultra-consistent chip sizing; twigs and small stems which can be difficult to size are easily fractured through our innovative system. The chipper grate is located next to the chipper drum and ensures that materials passing through the grate meet a specific size requirement.

tracks

Track Type & Width	triple grouser, 18" wide
Ground Pressure	11.2 lbs/in²
Track Length	13' 7"

chipper

Drum Size	36" diameter x 45" wide
Knife Pockets	6 or 12 (staggered)
Knife System	Babbitt or Key Knife
Chip Size	¼” to 1¼”

weights

Machine Weight

58,500 lbs

dimensions

Operating Length	30'5"
Operating Width	10'3"
Operating Height	11'7"
Travel Width	10'3"
Travel Length	30'4"
Travel Height	11'7"
Frame Length	29' 4½"
Front Overhang	7' ¾"
Rear Overhang	9'
Front Angle of Approach	15º
Rear Angle of Approach	18º
Front Ground Clearance	2' 10½"
Rear Ground Clearance	2' 4"
Ground Clearance	2' 4"

powertrain

Engine	Cat C18 Tier IV 755 hp
Clutch	PT Tech HPTO 15 FX
Fuel Tank Capacity	280 gallons
Main Hydrauic Tank Capacity	110 gallons

production

Chip Output

60 to 120 tons per hour

*Actual production output may vary due to moisture content, material density and size, support equipment, and equipment options. Production rates are based on operating 50 minutes per hour.

system controls

Peterson Adaptive Control System	Yes
Radio Remote	Yes
Peterson+ Analytics	Yes

feed system

Feed Opening (w x h)	41" x 24"
Feed Length	7' 9"
Feed Height	4' 9"
Feed Speed Range	up to 120 ft/min
Feed Conveyor Width	37"
Feed chain	3 Sections WDH120
Compression Roll Diameter	28"