Phone(s): 437-324-4766

https://cardinalequipment.com

31 Taylor Blvd.,
Port Perry  Ontario
L9L 0B7

Astec - Peterson 4310B Déchiqueteuse à tambour

Listing image Listing image Listing image Listing image
Specifications

Model 4310B Category Name Forestry & Environmental Recycling Year 2025
Sale Type New Manufacturer Astec - Peterson Odometer km
Price Contact for price CAD  
Description

The track mounted 4310B Drum Chipper is suited for high volume biomass producers who have a wide variety of feed material from brush and small feed stock to logs up to 24 inches (61 cm) in diameter.
The 4310B is powered by a 755 horsepower (563 kW) C18 Tier IV Caterpillar engine. At 58,500 pounds (26 535 kg), the track mounted 4310B Drum Chipper is designed for operations requiring high production and frequent moves between jobs.

The chipper utilizes a 36 inch diameter by 44¾ inch (91 by 114 cm) wide drum with either 6 or 12 knife pockets. Traditional Babbitt type knife systems are standard equipment. Chip length can be set from 1⁄8 to 1¼ inch (3 to 32 mm) depending on rotor and knife configuration.
FEATURES

Knife Assemblies at the Heart of the Chipper

Produced from the highest quality alloy chromium steel, heavy-duty Astec knife assemblies achieve uniform production of wood chips
 with high accepts and minimal losses.

Select from 6- or 12-Pocket Drum

Featuring durable AR400 wear surfaces, the 4300 series Drum Chippers comes standard with an 6-pocket drum rotor with one Babbitted knife per pocket. A 12-pocket drum rotor is available for chipping microchips.

Discharge Spout Options

Two discharge spouts are available on all Peterson Drum Chippers. An end-load spout designed to load closed-top chip vans. A top-load discharge spout is also available and designed to load open-top chip vans.

Superior Product Sizing

Peterson’s drum chipper grate system provides ultra-consistent chip sizing; twigs and small stems which can be difficult to size are easily fractured through our innovative system. The chipper grate is located next to the chipper drum and ensures that materials passing through the grate meet a specific size requirement.

 
TRACKS
Track Type & Width triple grouser, 18" wide
Ground Pressure 11.2 lbs/in²
Track Length 13' 7"

 
CHIPPER
Drum Size 36" diameter x 45" wide
Knife Pockets 6 or 12 (staggered)
Knife System Babbitt or Key Knife
Chip Size ¼” to 1¼”

 
WEIGHTS
Machine Weight 58,500 lbs

 
DIMENSIONS
Operating Length 30'5" 
Operating Width 10'3" 
Operating Height 11'7" 
Travel Width 10'3" 
Travel Length 30'4" 
Travel Height 11'7" 
Frame Length 29' 4½" 
Front Overhang 7' ¾" 
Rear Overhang 9' 
Front Angle of Approach  15º
Rear Angle of Approach  18º
Front Ground Clearance 2' 10½" 
Rear Ground Clearance 2' 4" 
Ground Clearance 2' 4" 

 
POWERTRAIN
Engine Cat C18 Tier IV 755 hp
Clutch PT Tech HPTO 15 FX
Fuel Tank Capacity 280 gallons
Main Hydrauic Tank Capacity 110 gallons

 
PRODUCTION
Chip Output 60 to 120 tons per hour

*Actual production output may vary due to moisture content, material density and size, support equipment, and equipment options. Production rates are based on operating 50 minutes per hour.
SYSTEM CONTROLS
Peterson Adaptive Control System Yes
Radio Remote Yes
Peterson+ Analytics Yes

 
FEED SYSTEM
Feed Opening (w x h) 41"  x 24" 
Feed Length 7' 9" 
Feed Height 4' 9" 
Feed Speed Range up to 120 ft/min 
Feed Conveyor Width 37" 
Feed chain 3 Sections WDH120 
Compression Roll Diameter 28"

 
DOWNLOADS

Name

Link
Drum Chipper Brochure Download
Astec-Peterson-4310B-Drum-Chipper-Spec-Sheet-English Download

 
Cardinal Equipment 31 Taylor Blvd.,,  Port Perry  Ontario  L9L 0B7 https://cardinalequipment.com/