ID # 39137471

Astec - Peterson 5000H Whole Tree Chipper

Call for Price
Overview

The Peterson 5000H Whole Tree Chipper produces high quality low bark content chips for wood pulp and pellets, processing whole trees in one continuous operation.

Equipped with a large feed throat, the 5000H Whole Tree Chipper can accept up to a 23 inch (56 cm) diameter single tree or multiple smaller stems.

The 5000H Whole Tree Chipper can be configured with a three or four pocket disc, with several optional sheave sizes to make precisely the chip you need. The standard three-pocket disc produces chips from 5⁄8 to 1 1/4 inches (16–32 mm) long, while the optional four-pocket disc produces chips from ½ to 1 inches (13–25 mm) long. Chipping production rates up to 100 tons (90 tonnes) per hour can be achieved depending on chip size and wood characteristics.

Specifications
Model
5000H
Category Name
Forestry & Environmental Recycling
Year
2025
Sale Type
New
Manufacturer
Astec - Peterson
chipper
Drum Size 50" diameter x 60" width
Knife Pockets 8 or 16 pockets (staggered)
Knife System Babbitt or Key Knife™
Chip Size ¼" to 1 ¼"

 

weights
tri-Axle Weight 59,960 lbs 
5th Wheel Weight 45,000 lbs 
Total Weight 103,500 lbs 

 

features

Astec Peterson 5000H Whole Tree ChipperEasy-to-Service Chain Flails and Replaceable Wear Liners

Upper and lower chain flails strip bark and limbs from the stems, replaceable UHMW wear liners protect the flail housing sidewalls. 

Astec Peterson 5000H Whole Tree ChipperA high visibility, weatherized cab meets OSHA Standards

Ergonomic joystick controls provide precise control of the two-section knuckle-boom log loader. End loading or top loading spouts are available.

Astec Peterson 5000H Whole Tree ChipperTwo chipper disc and knife systems available

Peterson disc chippers come with three or four pocket, 66" (167 cm) diameter chipper discs with traditional Babbitted knife systems, or Key Knife™ systems.

 

downloads

Name

Link

5000H Whole Tree Chipper Spec Sheet English Download

 

dimensions
Operating Length 51' 3" 
Operating Width 11' 9" 
Travel Length 53' 6" 
Travel Width 11' 7" 
Travel Height 13' 6" 
Frame Length 50' 6" 
Front Ground Clearance 2' 11" 
Rear Ground Clearance 10" 
Ground Clearance 13" 
Axle Spacing 60" 
Front to 5th Wheel 2' 2" 
5th Wheel to Center Axle 41' 9" 
5th Wheel to Rear Axle 46' 8" 
5th Wheel Height 4' 2" 

 

powertrain
EngineCAT C27 950 hp or 1050 hp
  CAT C32 950 hp 1125 hp  or 1200 hp
Clutch PT Tech HPTO 15
Fuel Tank Capacity 375 gal
Hydraulic Tank Capacity 320 gal

 

system controls
Adaptive Control System Yes
Radio Remote Yes
Peterson+ Analytics Yes

 

delimber/debarker
Flail Drums single lower and dual floating upper  
Drum Diameter 11"   
Flail Rods/Drum 6 per drum  
Flail Chain/Drum 78 chains, 8 links each  
Drive Type hydrostatic  
Flail Speed Range 400 to 700 rpm  
End Discharge Bark Mover 120" x 24"   
Variable Flail Speed adjustable from cab  

 

feed system & log loader
Feed System Specifications
Feed Opening (w x h) 53" w x 24" h 
Feed Speed Range 64 to 170 ft/min
Maximum Log Diameter 23" 
Feed Rolls dual with floating top rolls
Lower Feed Rolls 7 powered
Log Loader  
Lift Capacity 11,851 lbs at 15' 
Hydraulic Knuckle Boom 2-section, 26' 10" 
Grapple with Heel Rack 360° rotation, 42" 
Controls two lever electronic joystick
Enclosed Weatherized Operator's Cab with Air Conditioner

 

Documents